Accessories for Audere Pro Z-Mode Jazz & Module Preamps
Programming Switch for a Pro JZx Preamp
This Switch on wires with connector is plugged onto the "PGM" pins on the Pro JZx preamps to allow the user to change the settings on the Z-Mode switch positions. Each Z-Mode switch position can be set to 1 of 9 internal settings for a Pro JZ3x preamp or 1 of 17 internal settings for a Pro JZ6D preamp.
90% of customers like the defaults and do not change the Z-Mode selections but if you like experimenting this is a very powerful tool.
Not included but sold below at a discount for US preamp orders.
Included with international orders due to the relatively high cost of shipping this item separately.
Cap Kit for a Pro Z Preamps and Pro JZx Preamps
This optional set of capacitors are plugged into gold sockets on the circuit board to adjust the frequency location of the peak in High Z-Mode only. You can adjust the frequency to a lower or higher frequency than our defaults which use a 330 pF for the Bridge pickup loading and 680 pF for the Neck pickup loading.
95% of our customers like the defaults and have never purchased a cap kit.
541 867 6878
4909 S Coast Hwy, STE 295
South Beach, OR. 97366
Copyright 2016 Audere Engineering LLC